14 best hacksaws for wood, rating 2021 based on reviews

How to choose a hacksaw for wood

The choice of saw, whether for gardening work or for repair and construction purposes, should be approached responsibly. After all, if you buy the wrong tool, at best there will be difficulties in working, it will be difficult to achieve the desired result, and at worst there is a risk of injury.

Experienced carpenters advise paying attention to the working surface of the hacksaw - the blade. Before purchasing, be sure to find out what kind of steel is used in the saw. A blade with good hardening and correctly sharpened teeth will be much more effective in use than a tool with a poor working base.

A hand saw is without a doubt a necessary tool in the household.

There are different types of hacksaws for woodworking, which differ in many ways. For example, the ease of sawing and the service life of a hacksaw depend on the blade. In total, when buying a hacksaw for wood, you should pay attention to three components:

1. Blade (steel grade, length);
2. Teeth (their size, shape, distance between them);
3. Handle model.

Length and size of the canvas

You need to choose a hacksaw for wood based on your needs: for cutting small, not large building materials, a 300 mm hacksaw is enough. If the purpose of the purchase is repair, use in the country, or, especially, construction, it is advisable to choose a saw with a base of 450 - 500 mm. Also, we must not forget about the “golden rule” of choosing a hacksaw: the length of the tool must be at least twice as long as the workpiece being cut.

The most common hacksaws - with blade lengths from 350 to 600 mm - are medium sizes. It is believed that up to thirty-five centimeters these are mini-saws, and over 60 cm – large ones. The success of working with wood depends on the correct choice of blade length.

If you take a tool that is shorter than optimal, you will have to put more effort into cutting. By choosing a blade that is too long, the saw will spring back and also create additional difficulties.

Classic hacksaw with a comfortable and ergonomic handle

Tooth size and shape

This property of the saw affects the main factor of the tool - its purpose. The right size can be easily selected using the TPI coefficient. This is a special scale showing the number of teeth per inch of working length of the blade. Often this coefficient is indicated directly on the working surface of the tool.

Advice! Hacksaws with large teeth are well suited for roughing, initial work on construction sites, and sawing trunks. Working with small cutters will take more time and effort, but the quality will be higher.

Wood saw with double action blade

Differences between incisors in appearance

The triangular tooth configuration is considered standard. Variations are allowed: acute or isosceles triangle. The advantage of such teeth is that they are easy to sharpen. The cut is quite neat without any rough notches.

It is best to use a hacksaw with triangular cutters for transverse or longitudinal cuts.

Tempered blade-shaped cutters with the correct layout can cope with any type of wood

Another important point that you should pay attention to before purchasing a saw is the teeth of the blade. Cheap models use regular cutters, while expensive ones use higher quality hardened teeth. This characteristic will affect the cutting speed and accuracy.

The option with a hardened cutter is good because of its energy consumption - you don’t have to sharpen anything yourself, because the saw will be as sharp as possible. However, a non-hardened cutter can always be sharpened “to suit you” (or when it becomes dull), which cannot be done with hardened teeth.

With small cutters the cut will be more accurate, but the work will take more time; with large ones, on the contrary, you can saw off faster, but the result will be a rough cut.

Sharpening saw teeth is a difficult task, so if you do not have enough experience, it is better to entrust this task to a professional

Handle design

The design of the handle is an important characteristic that affects the quality and safety of work. Handles come in different shapes, depending on the purpose of the hacksaw. They can be made from different materials: wood, plastic, metal or rubberized.

There are 2 types of handles:

• reversible (with the ability to easily change the canvas)
• classical.Important! An awkwardly held hacksaw will slip in your hands, bend and move poorly through the source material, which can lead to injury.

The efficiency of work directly depends on how well and comfortably the hacksaw handle is made.

Material requirements

To ensure that the hacksaw can serve you for a long time, you should choose a model whose blade and handle are made of high-quality materials. Such a hand saw will of course cost more, but you are unlikely to achieve a quick and high-quality cut with a cheap option.

A stainless steel hacksaw will last for decades

Rating of hand saws for wood and metal

A good model is the Bahco 208 hacksaw, which is a pen saw. It allows cutting in hard-to-reach places, which is facilitated by the front loose end of the cutting element. The tool reaches dimensions of 34x10x2.5 cm and weighs 260 g. Thanks to the presence of fixing screws for the blade, good cutting ability of the device is guaranteed.

High-strength Sandflex blade is used as the cutting element, resulting in increased cutting accuracy. You can buy such a hacksaw for metal for 900 rubles.

In order not to make a mistake when choosing hand saws for wood and metal, you need to familiarize yourself with the rating of these tools.

The TOREX 10A 130 model is popular. The tool has compact dimensions of 51.5x13x3.5 cm and a light weight of 700 g. The ergonomic handle of the hacksaw is a solid rubberized product, which facilitates convenient use. The cutting blade rotates, which makes it possible to cut at different angles. This also favors the high productivity of the tool, the cost of which reaches 500 rubles.

The Gross Pirahna 77604 hacksaw, which makes a clean and precise cut, receives flattering reviews from experts and buyers. The blade is made of bimetal with high-speed steel teeth. The blade length is 300 mm. Thanks to the rubberized handle, a comfortable grip and reliable hold of the hacksaw is ensured during its operation.

The tool has dimensions of 40.5x15.5x3.5 cm, weight reaches 900 g. The tension of the blade is created using a lever mechanism, which allows you to get an accurate, straight and neat cut. The cutting element can be installed at an angle of 45 or 90 degrees. The price of a hacksaw is 1.4 thousand rubles.

A hand saw for metal is an essential tool for the home craftsman. Using this device, you can cut workpieces and parts from any materials. When choosing a tool, you should pay attention to the quality of the cutting blade, which ensures a clean and accurate cut.

Technical characteristics of hacksaws

According to GOST, wood hacksaws intended for carpentry and joinery work (hand cutting of wood) must meet certain technical characteristics.

The state standard specifies what materials the blade and handles can be made of, and what the connection between the working surface and the handle should be. The permitted dimensions of the tool and its individual parts are also indicated. There are requirements for sharpening and spacing of cutters, the minimum permissible sharpening rate to the front and rear edges of the tool.

Characteristics of swivel chair with hacksaw

A rotary miter box with a hacksaw is represented by equipment consisting of a saw and an adjustable stand, with which you can adjust the cutting angle from 15 to 135 degrees. The miter box can be made of metal or plastic. The first option is used for cutting molded elements of small thickness, and the second - for a small amount of work.

A stand in the form of a miter box is used to give the instrument additional rigidity, while simultaneously acting as a limiter. A hacksaw with a blade equipped with small cutters can have a length of 290-600 mm.

When cutting a workpiece, the cutting element enters it at a certain angle, simultaneously in the vertical and horizontal plane. Thanks to this two-plane tool, it is possible to form a bevel at the end of the workpiece of any configuration.

A device with a rotating miter box is one of the best professional-type hacksaws for wood and metal. It is advisable to use it for carpentry work of increased complexity. The weight of the equipment is 2-4 kg. The price of a hacksaw for metal with a miter box is 2 thousand rubles.

The rotary miter box adjusts the cutting angle from 15 to 135 degrees.

To operate such a tool, the frame must be secured to the working surface using self-tapping screws or a clamp. Markings should be applied to the workpiece to be processed indicating the cutting locations. The product is fixed on the miter box so that the mark coincides with the slots on the plate. Then you need to set the cutting angle degree and secure the hacksaw so that it works in the same plane. After this, the workpiece is cut.

Top best hacksaw models

When choosing a hand saw for wood, there are many factors to consider. First, the purpose for which the tool will be used. Secondly, the components of a hacksaw: saw blade, size and shape of teeth, handle (it should be comfortable). The saw should be user-friendly and sharp. Below is a list of the best hand tools for woodworking , according to parameters and according to customer opinions.

STANLEY JET CUT SP 2-15-288

Carpenter's saw, blade size - 50 cm, teeth suitable for longitudinal and transverse cuts. Gross weight - 0.5 kg.

BISON "EXPERT"

Woodworking devices from the ZUBR company are represented by the following models:

• EXPERT 15071-45: cross-cut saw, blade length - 45 cm, tooth pitch - 3.5, weight - 0.34 kg.
• EXPERT 15071-40: cross-cut saw, length - 40 cm, pitch - 3.5, weight - 0.33 kg.
• EXPERT 15073-45: cross-cut saw, length - 54 cm, pitch - 5, weight - 0.34 kg.

STANLEY OPP 1-20-089

Carpentry tool, blade length - 38 cm, hardened teeth. Gross weight - 0.5 kg.

BAHCO 396-LAP

The length of the canvas is 19 cm, folds, has an anti-corrosion coating, and is fixed in the closed and open state. Gross weight - 0.215 kg.

Encore Wolf 9858

For cross-cutting wood, blade size is 40 cm, tooth pitch is 4 mm, sharpened at three angles, which is a big plus for speed of work. Gross weight - 0.35 kg.

Anchor Beaver 9857

Metal blade made of high-strength steel, for longitudinal and cross cuts, length - 50 cm, teeth sharpened at two angles, therefore quite versatile. Gross weight - 0.5 kg.

IZHSTAL 030108-050

For carpentry work, blade size - 50 cm, pitch - 6.5 mm, designed for two types of cutting. Gross weight - 0.46 kg.

Gross Piranha 24101

The most comfortable handle Country: Germany (made in China) Rating (2021): 4.6
If the definition of a professional hacksaw can be applied to a wood hacksaw, then this is exactly the model we have in front of us. The German manufacturer took into account all the nuances and used them in their product. Here the teeth are sharpened on three sides, and the teeth themselves are hardened, which allows them not to become dull over a long time.

In addition, this is a universal tool that can be used to cut not only wood, but also plywood, as well as laminate. The teeth on the blade are very small and extremely sharp, which allows you to make a very thin cut without chipping and even along the wood fibers. The manufacturer also paid a lot of attention to the ergonomics of the tool. The handle is plastic and has a rubber insert at the grip site. Working with such a tool is easy and convenient, even for a long time.

BARTEX Expert-TPD-16

Best Price Country: China Rating (2021): 4.6

A hand saw is not the most expensive tool, but even among them there are often products that are quite expensive. It’s difficult to say whether it makes sense to overpay, especially if you don’t use the tool that often. And we have before us the most budget option, the price of which is less than 400 rubles.

Despite its cheapness, the model has hardened teeth, and judging by the reviews, this is indeed the case. True, sharpening here is only on two sides, that is, cutting will be somewhat more difficult than with three-sided sharpening. It is worth understanding that sharpening teeth on three planes is quite difficult, and many manufacturers avoid this step in order to reduce the cost of their products. Yes, it’s impossible to call this hacksaw the best, but it is the cheapest, and this is its main advantage.

Vira 800240

Three-sided sharpening of teeth Country: Russia (made in China) Rating (2021): 4.7

A professional hacksaw, in addition to three-sided sharpening of the teeth, also has a hardened blade. And this is a very complex technological process, since it is the teeth that need to be hardened, and not the entire blade. If you harden the entire blade, it will simply break under load, and the hardening process leads to a significant increase in the cost of the tool. But not in this case.

Here we have the best hacksaw for wood in terms of price-quality ratio. As they write in the reviews, the teeth here are truly hardened, and this is not an empty advertising statement. They are sharpened on three sides, and do not become dull for a long time and do their job perfectly. And as an added bonus, there is a ruler scale on the back of the blade. As they say, it’s a small thing, but it’s nice.

All about teeth on hacksaws for wood

What a hacksaw is and what types of tools there are is known, so now it won’t be difficult to choose the most suitable option. But there is no need to rush, since in addition to the main criteria for choosing hacksaws, you also need to take into account auxiliary factors, which will allow you to even more accurately select a tool for the appropriate task.

Such auxiliary factors for selection include sizes, types and number of teeth. It is these parameters that have a direct impact on the quality of the cut, the speed of work, as well as worker fatigue. Let's look at each parameter and find out what type of teeth should be on the wood hacksaw you choose for your home.

STANLEY JETCUT 2-15-283

Top Choice Country: China Rating (2021): 4.9

Here is a hand-held wood saw made by a popular Chinese brand that deserves respect for the quality and durability of its products. Not the cheapest option on the market, but it has a whole list of advantages. For example, three-sided sharpening, which allows cutting while cutting the blade in both directions. Considering the blade length is 450 millimeters, such a tool will quickly deal with any wooden workpiece.

Also in reviews of this product, they often mention a comfortable handle made of hard plastic and with a rubber insert in the grip area. This is the most convenient hand tool that you can work with for a long time and not experience fatigue. In addition, the blade is made of hardened steel, which means it will not often become dull, as happens with cheaper analogues.

Checking steel and quality of teeth sharpening

When purchasing, you need to take into account not only the parameters by which the tool is made, but also the quality of sharpening of the teeth and straightness of the blade. We'll find out how to check it yourself later.

1. To check the quality of steel you need to look at the design of the blade. It should be perfectly straight. Now, to make sure that the tool is made of high-quality steel, you should hold the hacksaw with one hand by the handle, and with the other by the tip of the blade, bend it to 70-80 degrees, but do not overdo it, as it may burst. After this, release the canvas and look again at its straight shape. If it remains the same as before, it means it was made using high-quality tool steel. If a bending angle has formed, then such a tool is made of low quality steel, and it will not last long
2. You can determine the quality of sharpening visually by looking at the links. If their edges sparkle, then they are sharpened, and if they merge with the blade, then the sharpening is not done well enough

Choosing a tool requires an appropriate approach, and sometimes it is better to overpay than to buy a hacksaw for the home of insufficient quality. Even if such a tool will serve for a long time, you will suffer with it not only when working, but also sharpening the teeth.

Best Custom Hacksaws

Non-standard hacksaws can cut not only metal or wood, but also other materials, such as laminite or foam concrete. The difference lies not only in the shape and configuration of the blade, but also in the shaper of the saw itself. For example, to cut laminate, a triangular blade with a very small and very frequent tooth is used. This allows you to cut without chips or other errors. There are also more exotic tools, for example, designed specifically for cutting branches from trees. There are quite a lot of similar designs on the market, so we settled on the five most interesting options.

How does blade thickness affect performance?

Another important parameter is the thickness of the canvas. The difference in thickness is almost impossible to detect by eye, so many manufacturers indicate its values ​​on the surface of the device. Thickness affects the following parameters:

1. Device Durability
2. Kerf thickness
3. Scope of application

The thicker the canvas, the more reliable it is. Hacksaws with thick blades do not “play” when working, so it is recommended to use these types of blades for sawing thick wood. Thin sheets are fragile, and when bent at an angle of 90 degrees, they may break. They are suitable for sawing thin beams, boards, branches and other materials. They also allow you to obtain high-quality and thin cuts in materials.

Bow saws for wood

The slightly strange appearance of this type of hacksaw does not in any way affect the performance and quality of work. A special feature of this type is the ability to work both in the garden when pruning trees and with lumber blanks.

1

Bahco “ERGO”

Rating: 4.9

Average price 1952 rub.

A good medium sized bow saw for home use. The traditions of the European instrument of this type are embodied - a lightweight tubular frame and a handle with finger protection.

The saw blade is made of tool steel. Unlike other types of hacksaws, their use in pruning trees also means that the blade is coated with a protective layer against corrosion. This copy belongs to a professional instrument. The tension is screw-type, on the handle, which is much better than fixing it with a clamp. Maximum tension force – 120 kg. Canvas length 53 cm.

2

Fiskars 1000615 (124810)

Rating: 4.7

Average price 1319 rub.

Premium quality saw from the Finnish company Fiskars. The long length is designed for a wide range of work, including heavy work in the garden. Despite its impressive size, it weighs only 770 grams.

The shape of the teeth is also noteworthy - the use of the so-called “Kremlin” tooth, when small teeth are combined 2 into one, with a deep cut. The handle is ergonomic, with rubber inserts. The advantage of the tool is its excellent quality and ease of use.

3

STANLEY Raker Tooth 1-15-379 530 mm

Rating: 4.8

Average price 560 rub.

Large bow saw for a private home. Impressive dimensions – 640 mm – significantly expand the application possibilities. The blade is made of tool steel, the tension on the frame is carried out by cocking the lever of the handle.

The length of the canvas is 530 mm.

The handle is equipped with finger protection with a rubberized part for a comfortable grip with your fingers. The cutting edge is hardened teeth with an “American” profile. Designed for working with raw wood, it perfectly provides both transverse and longitudinal cuts. It cuts branches and twigs well.

4

GRINDA for wood, 530 mm / 21

Rating: 4.6

Average price 276 rub.

A small bow saw for working in confined spaces. In fact, this is an indispensable hacksaw for working in the garden from ladders.

Tool steel blade. Tension is carried out by a lever on the handle. The handle is protected with additional protection. The teeth are hardened and of regular shape. The positive aspects include high-quality sharpening of the cutting edge of the saw.

Classification

There are several varieties designed to perform individual tasks. They are divided into groups according to different characteristics.

By type of canvas:

• Narrow. Used for cutting out various shapes with a relatively large radius of curvature of cutting lines.
• Regular. This is the most common type of saw, has a standard blade width and is designed to perform different jobs.
• Obushkovaya. These tools have a wide blade with fine teeth. Capable of performing clean cuts with high precision. Used for precise, critical work using a template or pre-applied markings. A special feature of backed hacksaws is the need to process material that is obviously thinner than the blade - the presence of a backing will prevent it from being passed through the cut.
• Luchkovaya. A narrow sheet with a small tooth is stretched between two support bars. This design combines several capabilities - clean, neat cuts, cutting accuracy and high productivity.

By type of tasks performed:

• Classic. It is used in most situations when it is necessary to saw off a piece of board, saw through timber or solve other issues of a common nature.
• Trimming. Used to adjust elements protruding above the plane. The handle of such a saw is placed in such a way as not to interfere with the blade coming into contact with the material along its entire length. A special case of a scoring saw is the abutment construction. This group also includes tenoning and edging saws.
• Circular. The narrow blade allows you to make figured cuts. You can cut a closed contour by starting work from a pre-drilled hole. The free end of the blade is not secured, which requires caution during operation—it is easy to bend or deform the saw with a careless movement.
• Plywood saw. It has a wide blade that allows you to hold a straight cut without the danger of taking it to the side. The teeth at the beginning of the blade allow you to start cutting from the middle of the plane.
• Reward. This saw is capable of performing specific tasks - cutting grooves and other structural elements. It has several handles, and the method of operation is closer to the method of processing with a plane. Requires skills and experience from the master.
• Folding saw. Typically, such a tool has a handle that is detached or rotated, making the overall length of the hacksaw noticeably shorter. Convenient for a hike, trip or other field conditions.

The traditions of carpentry in this country require virtuoso mastery of the instrument, the quality of which has been elevated to the level of art. The technique of working with Japanese saws cannot be repeated with a conventional hacksaw, since the elasticity of the blade and the ability to maintain shape and plane are used.

The names of the tools are little familiar not only to beginners, but also to experienced specialists:

1-Kataba 2-Ryoba 3-Dozuki

• Kataba. A saw with teeth on one side of the blade. It has a universal sharpening that allows you to perform both longitudinal and cross cuts.
• Rioba. The blade of these tools is equipped with teeth on both sides of the blade, and on one edge there is a notch for longitudinal cutting, and on the other - for cross cutting.

• Dozuki. The flexible blade is designed for precise and accurate cutting. in the area of ​​the handle, the teeth become smaller, which is convenient for performing critical work.
• Mawashibiki. A narrow blade with fine teeth, capable of producing fine and clean work.

A common feature of Japanese hacksaws is their relatively small size and specific method of use. Unlike European tools, which are effective when moving away from you, Japanese saws are all designed to move towards you. This is unusual at first, but experienced people testify to the significant advantages of this technique.

TOP hacksaws with blade

To obtain a perfectly even cut, special types of hacksaws are used in carpentry and joinery - backed saws. Today this type is represented by saws on the blades of which a reinforcing profile is installed - a butt. Thanks to this, the canvas remains as smooth as possible during operation and does not bend.

1

BAHCO NP-12-TEN

Rating: 4.9

Average price 1110 rub.

A small tool for finishing work on workpieces where a particularly smooth cut is required. The blade length is 300 mm, which is enough to work with small and medium-sized workpieces. The handle is monolithic and non-removable. The teeth are hardened, the shape is universal for both longitudinal and transverse sawing.

The backing is made of a separate metal plate, secured by double crimping. The saw is intended for both professional and home use. Thanks to the hardened cutting edge, it does not require sharpening.

2

STAYER0 mm

Rating: 4.8

Average price 445 rub.

A saw for wood in the signature stayer style. Saw blade 350 mm long. The handle is standard for all STAYER saws - impact-resistant plastic with a rubber lining. The blade is fastened with bolts. The blade has hardened teeth of a universal type. Laser sharpening. Teeth pitch 12.

Types of hacksaws for wood

When wondering how to choose a hacksaw for wood, first of all you need to start from what you are purchasing it for.

1. If you need a hacksaw for plywood, then just choose the classic - an inexpensive option, where there are always variations with a base and cutters.
2. If the tool is planned to be used for various types of work (repairs at the dacha or in the apartment), then the advantage will be that it is included in a set of replacement blades. By changing the working base depending on your goals, you can use one saw to make straight, transverse, and figured cuts, and trim trees and shrubs.

When choosing a hacksaw, it is important to pay attention to all its components, because its performance properties will depend on this. It is better to buy a stainless steel tool - the price is more expensive, but the service life will be longer.

Types of hacksaws for wood - the main criterion when choosing

A good craftsman should have at least two wood hacksaws in his arsenal. One saw is used for cutting dry boards, and the second tool is used for wet ones (when pruning an orchard). They differ in the setting and shape of the teeth. Depending on the type of work planned, it is necessary to purchase the appropriate type of cutting hand tool. To do this, let’s find out what types of wood saws are produced by manufacturers in different countries.

1. The classic version is an ordinary file, which consists of a closed handle and a blade of different lengths. This type of hacksaw is also called universal, as they are suitable for performing various tasks related to wood processing.

2. A round cutter is a highly specialized version of a cutting device, which is designed for cutting out different shapes and patterns in sheet woodworking materials, for example, when you need to cut a round hole in plywood. Circular files are also called narrow files, as they have a narrowed blade design and a sharp nose.

3. A backed saw, a tenon saw, or a tenon saw is another type of classic cutting tool, which also consists of a blade and a handle. The difference from the classics is that the blade has the same size (without tapering), as well as a fine tooth. This type of tool is intended exclusively for working with a miter box, when you need to obtain the appropriate cutting angle on woodworking material. Suitable for working with laminate flooring and skirting boards

4. Bow - it is more like a hacksaw for metal, only it has a larger frame part, as well as a blade with large teeth. It is used in locksmith workshops, as well as for sawing branches and twigs from trees. The instrument received this name for the reason that there is a similarity with an ancient weapon instrument - a bow that shoots arrows

5. Nagradka is a highly specialized type of hand saws used in carpentry and metalworking workshops. This type of tool resembles a plane, as there are two handles. At the bottom, a cutting blade with fine teeth is attached to the base, which allows you to obtain precise cuts on boards, beams and other similar materials

6. The folding one is a modernized version of the hacksaw, which is an excellent solution for backpacking trips. It folds up, which is its main advantage

Knowing what types of wood hacksaws there are and how they differ, you can decide for yourself which type of tool is suitable for performing certain planned actions. Considering the wide variety of tools under consideration, one of the most important wood saws in the household is the classic one.

This is interesting!
Unlike working with a hacksaw for metal, where sawing is performed by applying force from oneself, the situation with a wood saw is different.
Woodworking is carried out in two directions, that is, sawing is performed in the direction away from you and towards you. To choose the right hacksaw for wood, you need to consider the following main indicators:

• The size of the canvas, or rather its length. Not only the ability to saw large-diameter workpieces depends on the length, but also the speed of achieving the result, as well as the ease of performing the work
• The material of steel from which the blade is made. The efficiency and service life of the tool depend on this parameter.
• Teeth and their size - larger teeth do not mean a better tool. The larger the tooth, the easier it is to saw raw workpieces, but the lower the quality of the cut.
• Holder or handle - the ease of use of the tool depends on it. The more comfortable the handle, the easier it is to control the tool.

So, knowing the basic parameters for selection, buying the best wood hacksaws for the home craftsman will not be difficult. Among the many varieties of cutting tools, it will be difficult to choose the right option without the appropriate help. You can turn to a tool seller at a hardware store for help, but only in the end will you buy a hacksaw for which the seller will receive a percentage of its sale. If you need to buy a good hacksaw for wood, then tips and recommendations from the material will help you make the right decision.

The best all-purpose hacksaws

The scope of application of this tool is very wide - universal hacksaws can work with a wide variety of materials.

Haupa 150 mm 200285

5★★★★★editorial assessment

98% of customers recommend this product▶See review

A tension saw has a pistol grip and can cut metal, plastic or wood. The blade length is 150 mm. The instrument weighs only 164 grams.

Advantages:

• Good workmanship;
• Replaceable cloth;
• There is a saw tension screw;
• Comfortable grip.

Flaws:

• High price.

The hacksaw is suitable for various metalworking jobs, and its light weight and ergonomics allow you to cut for a long time without fatigue.

Bison “Molniya-7” 500 mm 1537-50 z01

4.9★★★★★editorial assessment

95% of customers recommend this product▶See review

A reliable and high-quality hacksaw is equipped with large straight teeth that are sharpened on both sides. The cut is precise even when cutting soft wood.

Advantages:

• High-quality steel sheet;
• Two-component comfortable handle;
• Pulse hardening of teeth;
• Durability.

Flaws:

• The blade may bend during operation.

The instrument has hanging holes for easy storage. Otherwise, this is just a good-quality and multifunctional hacksaw that always gives high-quality results.

Bahco PrizeCut 350 mm

4.8★★★★★editorial assessment

89% of customers recommend this product▶See review

The hacksaw is designed for cutting plastic, wood, chipboard, aluminum and laminate. The length of the canvas is 350 mm. Narrow, hardened dagger teeth ensure high-quality cutting. The sharpness of the cutters is maintained for a long time, and even when working with plastic, a perfectly even cut is obtained. This compact tool can handle everything except steel materials.

Advantages:

• Weight 215 grams;
• Durability;
• Clean cut;
• Fine and strong teeth;
• Reliable fastening of the canvas.

Flaws:

• Not the most reliable handle.

This hacksaw is often used for finishing cuts in wood, but other materials can also be used.

Sibrteh 24025 170 mm

4.7★★★★★editorial assessment

86% of customers recommend this product▶See review

The steel blade is easy to move and can be rotated 360°. This simple but multifunctional tool allows you to perform various tasks and act as a hand jigsaw. The canvas is easy to change, and a special mechanism regulates its tension.

Advantages:

• Two-component handle;
• 5 canvases included;
• Compact size and light weight – 250 grams;
• Budget cost.

Flaws:

• When working for a long time, your hand gets tired.

The Sibrtech hacksaw is suitable for cutting out shapes from wood, plastic or plywood.