Rating of sawing machines TOP 10 best 2021 and tips for choosing

JET JPS-10TSL-M 725000K-RU

Main characteristics:

Power - 1500 W;
Disc diameter - 254 mm;
Disc mounting diameter - 30 mm;
Rotation speed - 4200 rpm;
Cutting depth - 80 mm;
Tilt angle: 0-45°.

Sawing table and accessories. The stationary machine for professional use has a steel base with adjustable legs and a cast iron tabletop measuring 685x512 mm with two slots for installing auxiliary devices. Includes a pair of spreaders, a movable miter gauge and a rip fence with a quick-release cam clamp for quick setup.

Movable angle stop JET JPS-10TSL-M 725000K-RU.

Motor and saw blade. The model is equipped with a 1500 W electric motor with a single-stage belt drive. The cutting disc measures 254 mm with the most common mounting diameter of 30 mm and rotates at a frequency of 4200 rpm. It is possible to adjust the reach height and tilt angle up to 45 degrees from the vertical.

Functionality. The model is designed for cutting wood up to 80 mm thick, which is suitable for all carpentry and most preparatory construction work. To maintain cleanliness, the frame is equipped with a dust collector with a connection for an industrial vacuum cleaner.

Dust collector with pipe for vacuum cleaner JET JPS-10TSL-M 725000K-RU.

Safety. The saw has an automatic engine overload lock, a special emergency stop button and a movable transparent casing that covers the blade from accidental contact.

Special emergency stop button JET JPS-10TSL-M 725000K-RU.

Pros of JET JPS-10TSL-M 725000K-RU

Adjustable stationary design.
Cast iron table with markings applied to it.
Not a bad package.
Possibility of precise cutting at any angles.
Dust removal.
Overload protection.
High quality build.

Cons of JET JPS-10TSL-M 725000K-RU

High price.

DEWALT DWE7492

Main characteristics:

Power - 2000 W;
Disc diameter - 250 mm;
Disc mounting diameter - 30 mm;
Rotation speed - 4800 rpm;
Cutting depth - 77 mm;
Tilt angle - from -3 to 48°.

Sawing table and accessories. This mobile machine for professional woodworking weighs only 26.5 kg. It is easy to carry and install on any solid base using the 4 ergonomic handles located on both sides. The frame and table measuring 670x650 mm are made of high-quality steel. The composition includes an angular and parallel stop, installed in the required position using a printed scale. The sliding design allows you to work with workpieces up to 825 mm wide.

Sliding design DEWALT DWE7492.

Motor and saw blade. The 2 kW commutator motor has a gear drive that provides a spindle speed of 4800 rpm. Discs with a diameter of 250 mm with a seat size of 30 mm are installed on it.

Functionality. The machine is capable of cutting parts up to 77 mm thick. The plane of the disk can be tilted at an angle of up to 48 degrees.

Safety. The saw is equipped with a motor overload lock, a protective cutting blade guard and a pusher for working with small workpieces.

Pros of DEWALT DWE7492

Reliable materials.
High build quality.
Powerful engine.
Quick fixation of accessories.
Mobility.
Convenient carrying handles.
There are regular places for storing accessories.

Cons of DEWALT DWE7492

The included blade is for quick and rough cutting only.
No soft start.
There are complaints about the accuracy of the installation of the angle stop.

general description

The cutting machine is a base (bed) with an electric motor installed on it and a working surface (plane) with a hole in which the cutting tool (disc) is located.

Using a carpentry machine, you can process wood materials of varying hardness, chipboard, fibreboard, MDF, plywood, lining, raw wood and other building materials (plastic, laminate, soft metal, stone) in the form of chipboards and fiberboards, panels, sheets, beams, blanks

You can also carry out various types of processing:

trimming,
straight cuts;
at an angle;
combined;
along;
across.

Types of machines

Based on power, dimensions, and functionality, equipment can be divided into two large groups:

industrial (professional). They are designed for long-term processing of large volumes of materials under heavy loads. These are high-power models with a set of various functions, with shockproof properties, designed for long-term operation.
For household use. Such options have lower power, minimal functionality and, accordingly, lower cost. But the low cost of maintenance and repairs.

Based on the two main types, we will consider the subtypes of machines and, based on them, we will determine the criteria for choosing a sawing machine.

By type of cutting tool:

with circular saw (circular).

These types are reliable and can be used for industrial or domestic purposes.

Highly productive, with precise cutting, good material feeding speed.

Sawing occurs without cracks or chips. But they are characterized by high cost and a fairly large amount of waste.

With flexible saw or band saw.

Designed for woodworking. Suitable for industrial production and household use.

Support cross, longitudinal and curved cutting.

Depending on the type of arrangement, they can be tabletop or floor-mounted. They do not create noise, so they are convenient in the country house, in a private house for receiving boards, sleepers, beams.

The machines have a large cutting depth - 36 cm. They are safe to use and consume a small amount of electricity. Leaves a small amount of waste.

The disadvantages include slow material supply, low productivity, difficulties with coniferous species due to resin secretions that affect the quality of the cut.

Frame.

They are used for longitudinal sawing of logs or beams. The process occurs with the help of a saw frame on which the cutters are installed, in the form of translational movements.

Log saws

For longitudinal sawing and production of beams and boards from solid logs.

Multi-saw

Having several cutters. They involve longitudinal and transverse processing of wood.

They are characterized by low energy intensity, high productivity, bed stability, speed of material supply, and cutting quality, which affects waste from subsequent wood processing.

Number of disks

The tool can contain from one to several cutting discs and they are called:

single-disc;
multi-disc. In these types, the cutters can be positioned vertically or horizontally, in any combination of vertical and horizontal arrangement. Such machines do an excellent job of stone processing.

Bosch GTS 10J Professional

Main characteristics:

Power - 1800 W;
Disc diameter - 254 mm;
Disc mounting diameter - 30 mm;
Rotation speed - 3650 rpm;
Cutting depth - 79 mm;
The tilt angle is 47/2°.

Sawing table and accessories. This tabletop portable circular saw weighs only 26 kg. It has a rigid frame with handles, a flat steel table with dimensions of 642x572 mm and side markings for precise work. The model is equipped with an angular and parallel stop.

Unfolded tabletop Bosch GTS 10J Professional.

Motor and saw blade. The machine is equipped with an electric motor with a power of 1800 W. The cutting disc 254x30 mm rotates at a frequency of 3650 rpm. The soft starter eliminates sudden jerks and voltage surges during startup.

Functionality. The saw is capable of cutting wood up to 79 mm thick. The cutting plane can be quickly rotated and fixed at any angle up to 45°. The riving knife eliminates the possibility of the disc getting jammed.

Safety. The operator is protected from accidental contact with the working edges by a transparent casing with a connection pipe for connecting a vacuum cleaner. For operations with small workpieces, you can use a standard pusher. The start button is locked against unintentional pressing.

Protective cover with pipe for Bosch GTS 10J Professional vacuum cleaner.

Pros of Bosch GTS 10J Professional

Powerful and reliable engine that does not overheat during prolonged operation.
Spindle lock for quick and safe disc replacement.
Self-adjusting rip fence.
Ease of movement.
Compartment for storing accessories.

Cons of Bosch GTS 10J Professional

High noise level.
The corner stop gives play.
The riving knife is inconvenient to clean. You have to dismantle it, but the settings are lost.

Makita 2704

Main characteristics:

Power - 1650 W;
Disc diameter - 255 mm;
Disc mounting diameter - 30 mm;
Rotation speed - 4800 rpm;
Cutting depth - 91 mm;
The tilt angle is 45°.

Sawing table and accessories. This sawing machine has a mobile design and weighs 35 kg. It can be installed on any horizontal surface, secured with four bolts for reliability. The desktop is made of cast aluminum. The angular and parallel stops are secured in the required position with quick-release clamps, which saves the technician’s time.

Motor and saw blade. The 1650 W electric motor is protected from overloads and is equipped with a soft start device. The disk, measuring 255x30 mm, rotates at a frequency of 4800 rpm, ensuring high quality of the resulting cut.

Functionality. The disc offset is smoothly adjustable from 0 to 91 mm. It can be tilted up to 45 degrees. To remove dust, there is a connection pipe to the aspiration machine.

Adjusting the offset of the Makita 2704 disc.

Makita 2704 bevel adjustment.

Safety. The machine is equipped with a transparent disc casing, protection against unintentional activation and a brake that stops the mechanism within a few seconds.

Pros of Makita 2704

Thoughtful design with convenient settings.
High quality build.
High performance.
Large cutting depth.
There are regular places for storing accessories.
Motor overload protection.
Operational safety.

Cons of Makita 2704

Plastic gears of the disc lifting unit.
All mechanisms require careful initial setup.
With significant weight, it is not very convenient to carry and install.

Professional equipment

The following list is a rating of the best sawing machines intended for professional use. The equipment presented here differs significantly from household equipment in terms of operational and technical characteristics. Their cost is also correspondingly higher.

Makita MLT100, 42,300-45,600 rub.

Wood sawing machine Makita MLT100 Source makitaclub.ru

Small in power, but high-torque and reliable motor, the operation of which requires single-phase electrical voltage.
Compact, at the same time, massive frame, ensuring the stability of the structure.
The graduated scale is printed on the stop bar located to the left of the saw blade. Angle cuts are made using a clamp and a clamp, which ensures maximum compliance with the specified cutting criteria.
At the bottom there is a pipe for connecting to a vacuum cleaner hose.
The working surface is made of polished aluminum.
Protection of the operator's hands is achieved through a plastic casing placed on a metal bracket.
High efficiency and maximum safety of work on the circulation machine is ensured due to the soft start option and effective braking of the saw blade.

The working surface is increased due to folding shelves.

Technical characteristics of the Makita MLT100 model Source vseinstrumenti.ru

Healthy! The Makita MLT100 sawing machine is an excellent and reliable solution for a small production workshop or those who prefer to work only with proven equipment.

Makita 2704, 56,990-67,000 rub.

Sawing table Makita 2704 Source makitaclub.ru
A tabletop circular saw with folding legs can be used for both domestic and professional purposes. The cut is carried out with a saw blade with a radius of up to 130 mm. The power unit is protected from overloads thanks to the starting current stabilizer.

Operator safety is achieved by the presence of a plastic casing over the saw blade and an electric braking system. The latter instantly stops the rotation of the disk, which reduces the likelihood of accidental injury.

The key advantages of the Makita 2704 circulation machine are:

Possibility of making straight, transverse, oblique and combined cuts.
The above mentioned voltage stabilizer.
Durable, polished work surface made from cast iron.
Additional clamps located on the left side in the direction of movement of the workpiece being cut.
Increased engine power (when compared with the previous model of this brand).
Compact dimensions and relatively light weight

Technical characteristics of the Makita 2704 model Source vseinstrumenti.ru

Healthy! With such an extensive list of advantages of the circulation machine, when folded it easily fits in the trunk of a passenger car.

Metabo TKHS 315 C 2000, RUB 44,800-47,800

Circular machine Metabo TKHS 315 M 2000 DNB Source vseinstrumenti.ru
The first representative of an extensive family of circulation machines from Metabo. Designed for professional use, runs on a single-phase 220 V network. Ideal for working with docks, timber, and panels.

The features of this model include the following:

Reverse restart protection system to prevent unintentional activation after a power failure.
Induction power unit equipped with a forced brake and overload protection.
Convenient adjustment of the height and angle of the saw blade.
Galvanized work table and powder coated steel frame.
Folding, extending table, shelves.

Technical characteristics of the sawing machine Metabo TKHS 315 M 2000 DNB Source vseinstrumenti.ru

Healthy! The Metabo TKHS 315 C 2000 model is sold assembled. However, all bolted connections require additional broaching. This is where the disadvantages of the circular end.

Metabo TS 216

Main characteristics:

Power - 1500 W;
Disc diameter - 216 mm;
Disc mounting diameter - 30 mm;
Rotation speed - 5000 rpm;
Cutting depth - 63 mm;
Tilt angle - from - 1.5 to 46.5°.

Sawing table and accessories. Mobile machine for cutting wood weighing only 28.5 kg. For ease of movement, it has its own wheels. Installed on a workbench or prefabricated legs. The size of the table is adjustable from 585x630 to 780x930 mm. There is a quick-install parallel and movable miter gauge.

Motor and saw blade. The machine is driven by a 1.5 kW electric motor with a gear drive. The standard disc measuring 216x30 mm is made of hard alloy and has 30 teeth of variable size. The rotation speed of 5000 rpm ensures high productivity and excellent cutting quality.

Functionality. The saw cuts workpieces up to 63 mm thick. The position of the disk is adjustable in height and angle of inclination. If it is necessary to replace it, the spindle is blocked. There is a dust removal system. A smooth engine start is provided, protecting it from extreme loads.

Safety. The disk is closed from the outside with a transparent drop-down casing with a connection pipe for the vacuum cleaner. There is a motor brake, protection against accidental start-up and a pusher for accurate feeding of small parts into the cutting area.

Protective casing with connection pipe for Metabo TS 216 vacuum cleaner.

Pros of Metabo TS 216

Mobility.
Installation in two height positions.
Simplicity and high speed of adjustment.
Good equipment.
Compact when folded.
The riving knife is lowered for cleaning without the use of auxiliary tools.

Cons of Metabo TS 216

The engine is poorly protected from dust.
Not the most reliable leg design.

JET JTS-315SP

Main characteristics:

Power - 3100 W;
Disc diameter - 315 mm;
Disc mounting diameter - 30 mm;
Rotation speed - 3550 rpm;
Cutting depth - 60 mm;
Tilt angle - 0-47°.

Sawing table and accessories. This machine has a durable steel table measuring 550x800 mm, which is almost doubled in length due to a folding extender. The base is made prefabricated. Additional crossbars provide stability to the legs. There are a pair of wheels for easy movement inside the workshop. The kit includes a parallel stop with an eccentric clamp and a carriage for longitudinal movement of the workpiece.

Motor and saw blade. The 3.1 kW motor is powered by a 380-volt network. It easily copes with cutting wood and wood-based materials. The Z36 working disk measures 315 mm with a seat diameter of 30 mm and is adjustable in reach height and inclination angle. Spindle speed 3550 rpm.

Saw blade tilt handle and saw blade lift handle JET JTS-315SP.

Functionality. The machine is designed for cutting parts up to 90 mm thick. Sawdust is removed by aspiration from above and below the table, which helps maintain the necessary cleanliness in the workplace.

Safety. To protect the operator, there is a blade guard attached to the riving knife and a motor brake. There is a standard pusher.

Protective casing with pipe for vacuum cleaner JET JTS-315SP.

Pros of JET JTS-315SP

Wide table with the possibility of further increasing the area.
Powerful engine.
High performance.
Great saw depth.
Prefabricated design and wheels.
Quick setup.

Cons of JET JTS-315SP

The stops are installed with play, which requires independent modification of the design.
The model is sold without a power cable.
Poor instructions.

Which tabletop circular saw to choose?

Almost all sawing machines are similar in design and functionality, but some models have additional functionality that will increase the convenience or safety of using the saw.

For safety, it is better to choose a model whose disk has a protective casing that is activated only when the workpiece is brought close to the disk. Such protection will prevent injury and harm to health, even if it is connected to the network. You should not give preference to cheap models. They may turn out to be of poor quality or counterfeit.

If you work with materials constantly, then it is best to take a professional machine that allows you to perform large and complex work. For single construction work in a country house or at home, a low-power machine of 800 W or more is quite suitable.

Before purchasing, you should study reviews about the selected model on the Internet on various thematic forums and websites of sellers of similar equipment.

Bosch GTS 635-216

Main characteristics:

Power - 1600 W;
Disc diameter - 216 mm;
Disc mounting diameter - 30 mm;
Rotation speed - 5500 rpm;
Cutting depth - 70 mm.

Sawing table and accessories. This tabletop model is easy to carry and install by one person, as it has comfortable handles and weighs only 22 kg. The work table is equipped with parallel and angular stops. The design allows precise sawing of parts up to 635 mm wide. There is a special connection for connecting a vacuum cleaner or dust collector.

Motor and saw blade. A 1600 W motor with a soft start system and a spindle operating speed of 5500 rpm is installed here. Despite the small blade size of 216 mm with a 30 mm mounting hole, it is capable of sawing workpieces up to 70 mm thick.

Functionality. All devices have comfortable handles and can be adjusted. The position of the disk can be changed in height and angle of inclination. The parallel stop is clamped by one lever on both sides. There is a compartment for storing accessories.

Safety. The saw blade is covered with a two-section protective casing of a special design. There is an accidental start lock and a convenient pusher for working with small parts.

Two-piece protective cover Bosch GTS 635-216.

Pros of Bosch GTS 635-216

Light weight and compact dimensions.
Acceptable price.
Convenient settings.
Dust removal.
High quality build.

Cons of Bosch GTS 635-216

The table extender sags in the extreme position.
Noisy engine operation, especially when starting.
The standard blade does not produce a clean cut.

Metabo TKHS 315 C 2000 WNB

Main characteristics:

Power - 2000 W;
Disc diameter - 315 mm;
Disc mounting diameter - 30 mm;
Rotation speed - 2980 rpm;
Cutting depth - 85 mm;
The tilt angle is 45°.

Sawing table and accessories. The main structural elements of this machine are made of galvanized steel, which guarantees their strength and durability. The work table, measuring 800x550 mm, can be increased in length by adding an extension. The base consists of four stable legs and a pair of wheels for increased mobility. Precision cutting is ensured by a parallel stop with applied markings.

Motor and saw blade. The 2000 W induction motor with a rotation speed of 2980 rpm is suitable for long-term professional work. The machine is equipped with a 24-tooth carbide disc measuring 315x30 mm, which provides high speed cutting of wood.

Engine Metabo TKHS 315 C 2000 WNB.

Functionality. The disc offset is adjustable from 0 to 85 mm. The rotation axis is tilted by a convenient rotating device with a lock at an angle of up to 45 degrees. There is a connection point to an industrial aspiration unit.

Safety. The risk of injury due to careless handling is reduced to a minimum when using a protective casing and a standard pusher with a comfortable handle. There is a lock against jamming and overheating of the electric motor.

Protective cover Metabo TKHS 315 C 2000 WNB.

Pros of Metabo TKHS 315 C 2000 WNB

Lightweight and movable design.
Wheels and handles for moving by one person.
Large table surface with the possibility of extension.
Good dust removal.
Reliable engine.

Cons of Metabo TKHS 315 C 2000 WNB

There is no miter gauge with protractor.
Side support play.
In terms of cutting accuracy, the machine is more suitable for construction rather than carpentry work.

JET JSTS-10-M

Main characteristics:

Power - 1500 W;
Disc diameter - 254 mm;
Disc mounting diameter - 30 mm;
Rotation speed - 4500 rpm;
Cutting depth - 80 mm;
Tilt angle - 0-45°.

Sawing table and accessories. The hobby-grade circular saw is designed for tabletop installation. The main structural elements, including the 535x610 mm desktop, are made of cast aluminum, so the total weight does not exceed 25 kg. The rip fence is secured by one eccentric lever on both sides. The miter gauge moves easily along the T-slot. All devices have a clear scale and are adjustable.

Motor and saw blade. The 1500 W electric motor with gear drive provides a spindle speed of 4500 rpm. The machine is supplied with a Z40 saw blade measuring 254 mm with a seat diameter of 30 mm.

Functionality. The saw is suitable for cutting sheet wood, bars and boards up to 80 mm thick. The offset of the disc and its angle of inclination are adjusted by flywheels. For all accessories there are standard storage places with reliable fixation.

Safety. To protect the master, a transparent disc cover and a plastic pusher are provided. There is a dynamic engine brake.

Protective cover JET JSTS-10-M.

Pros of JET JSTS-10-M

Compact and light weight.
Affordable price.
A good set of functionality.
Convenient regulation.
Well-thought-out accessory storage system.

Cons of JET JSTS-10-M

Backlash of the rip fence.
No soft start.
Standard blade for fast, but not clean cutting.
High noise level.

The best manufacturers

The following companies are recognized as the best manufacturers of sawing machines:

Makita (Japan);
DeWALT (USA);
Metabo (Germany);
BOSCH (Germany);
ZUBR (Russia), etc.

What is the price

The price range of sawing equipment is quite wide: from representatives of the most budget options to professional models and depends on the quality of the material, equipment, power, and functionality of the machine:

from 4317 rub. for the model of sawing machine CALIBR EPN-900;
up to 230,000 rub. for the JET JTAS-12DX sawing machine model.

Depending on the budget, you can choose an option that completely suits the owner and performs the necessary operations efficiently, manifesting itself positively during operation.

Ryobi RTS1800EF-G

Main characteristics:

Power - 1800 W;
Disc diameter - 254 mm;
Disc mounting diameter - 30 mm;
Rotation speed - 4500 rpm;
Cutting depth - 80 mm;
The tilt angle is 45°.

Sawing table and accessories. This sawing machine consists of a folding frame with wheels for transportation and an aluminum table measuring 560x590 mm, to which all the main components and accessories are attached. The model is equipped with a retractable extension, parallel and angular stops.

Motor and saw blade. The 1800 W electric motor with gear drive is protected from overloads and equipped with a soft start system. A TCT cutting disc with 48 teeth is mounted on a spindle with a diameter of 30 mm. Rotation speed 4500 rpm.

Functionality. The machine is capable of cutting workpieces up to 510 mm wide at a right angle to a depth of 80 mm, and at an inclination angle of 45° - 58 mm. Components and keys have standard mounting points.

Standard holder for Ryobi RTS1800EF-G keys.

Safety. The disk is closed from the outside with a two-component transparent casing, which reliably protects the operator at any angle of inclination. The emergency stop button is painted red and is located in an accessible location.

Ryobi RTS1800EF-G protective cover.

Pros of the Ryobi RTS1800EF-G

Compact sizes.
Mobility.
Affordable price.
Nice disc included.

Cons of Ryobi RTS1800EF-G

Plastic body.
The table extension bends.
Ruler with paper markings.

Rating of the best sawing machines

Sawing machines

Budget segment

Amateur equipment has a number of features:

Low cost of parts and materials.
Fairly simple repairs and maintenance.
Quite low quality, efficiency

Encore Corvette 11

Price: 12 thousand rubles.

Encore Corvette 11

Great portable circular saw with stand. Can cut wood up to 80mm thick. Working with wood is carried out using a basic circular disk. The disadvantages include weak fasteners and hardware, which are very fragile and wear out quickly during operation of the device. The device lacks many useful functions, including the ability to start slowly.

Pros:

Very low price.
There are holes for additional tools.
Can cut wood up to 80 mm thick.

Minuses:

No slow start function.
High degree of wear of parts.

Technical characteristics of the device

Cutting depth: 60-80 millimeters.
Working surface area: 700x465 mm.
Weight: 28 kilograms.
Transmission type: Gear.
Electric motor power: 1.5 kW.
Rotation speed: 4500 rpm.

Ryobi RTS 1800

Price: 12 thousand rubles.

This unit has one of the most powerful motors in this price segment.

Thanks to the high speed of rotation of the disc, the device can cut even the hardest types of wood. Using a metal clamp, you can correctly adjust the cutting angle. Unlike the previous model, the Ryobi RTS 1800 has a slow start mode. Also in the case there is a very convenient storage for wrenches, consumables, and various workpieces. This model is the best in terms of price and quality ratio and provides high functionality for its price.

Advantages

Very powerful electric motor.
Convenient extendable table.
Possibility of adjusting the sawing disc.
Convenient built-in storage
Soft start mechanism
Electronic protection.

Flaws

Extremely weak fastenings.
Very rapid wear of working parts.
Difficulty of repair.

Specifications:

Cutting depth: 80-60 mm.
Working area size: 560*710 mm.
Electric motor power: 1.8 kW.
Transmission type: Gear.
Rotation speed: 4500 rpm.

BISON ZPDS 255 1600S

Price: 17-20 thousand rubles.

A very functional device with retractable tables, as well as a special compartment for tools.

It has a large number of technical shortcomings at a fairly high price. It has very weak fasteners that are quite difficult to work with. However, even with all its shortcomings, the machine is quite powerful and easily processes products with a diameter of up to 80 millimeters. The product also has excellent warranty conditions; the manufacturer undertakes to repair even those products that are defective during operation.

Advantages:

Convenient laser pointer.
Seats for tools.
Very powerful engine.

Flaws:

Weak fasteners for mechanisms.
Lack of soft start function.
No possibility to adjust the cutting angle.

Specifications

Cutting depth: 725*499.
Working surface dimensions.
Electric motor power: 1.5 kW.
Rotation speed: 4500 rpm.

Makita MLT 100

Price 35,000 rubles

The circular sawing machine is of fairly high quality. The circular saw is capable of making cuts up to 80-90 millimeters deep

The desktop is made of lightweight, durable cast aluminum. For convenience, the machine is equipped with a displacement protractor.

An important advantage is the presence of a slow engine start system. When the engine is turned off, vibration is damped using a mechanism.

Advantages

Low price.
Very solid base.
The presence of a slow start sitcom.

PATRIOT TS 255

Price: 12-17 thousand rubles.

High-quality woodworking equipment made in Russia. This tool can be fully called universal, multifunctional. The sawing machine from Patriot is already equipped with fixing legs, this will greatly facilitate its installation. A sharp circular saw with a diameter of 240 millimeters easily changes the angle of inclination and height. The engine power of the Patriot is 1.6 kW.

Advantages:

Low price.
Powerful engine.
Simple fixation.

Flaws:

The device makes a lot of noise.

Professional machines

Professional equipment is designed for complex and long-term work. It has increased power and long service life. Professional equipment is divided into several subtypes:

Mobile.
Stationary
Narrow profile
Multifunctional.
Universal

Belmash SDM 2000M

A powerful and multifunctional machine made in Belarus.

Price 29,000 rubles.

It can perform a large number of technological tasks:

Sawing and milling work using a disc.
Plane the workpiece.
Drill holes.

Despite its technical complexity, the Belmash machine is very easy to set up and operate.

Disadvantages include the inability to automatically redirect materials and the lack of a quick start function.

Advantages:

Huge functionality.
Very convenient and fast setup.
Convenient operation.
Increased mobility.
High power of the electric motor.

Flaws

No slow start function.
Poor fixation of the circular disc.

Specifications

Cutting depth: 85 mm

Work table size (Sawing - 732x456, Planing - 760x247, Milling - 410x190.
Rotation speed: Disc - 2800 rpm, Planing shaft - 7,700 rpm.

Bosch GTS10 XC

High-quality sawing machine from a well-known German company.

It has the best technical characteristics among all presented models. However, its price is also prohibitive. The most important advantages include a very powerful electric motor and a very strong frame. It will withstand even the strongest vibrations and will serve you for a long time. The machine is also equipped with a durable metal carriage, which allows you to work at different angles. Thanks to it, the Bosch GTS10 XC can be used for sawing various shapes and decorative products. A special screen is used to protect the worker. To keep the engine running efficiently, the quick start function is used. The Bosch machine does not require fixation due to its considerable weight and a special frame that prevents the tool from moving. And thanks to special bags for collecting shavings and wood dust, your workshop will be clean and tidy. Another important advantage of the Bosch unit is its long service life and the almost complete absence of maintenance and repairs.

Advantages

Very high power.
Huge functionality.
Supports several operating modes.
Durable and stable frame.

Flaws

It's very expensive.
Heavy weight

Specifications

Cutting depth: 60-80 mm.
Working area size: 1210x1288 mm.
Electric motor power: 2.1 kW.
Weight: 35 kilograms.
Rotation speed: 3200 rpm.

Conclusion

The best sawing machine is a unit from Bosch.

It has huge functionality and German quality. However, it is very expensive. The best representative of the budget segment is the PATRIOT TS 255, at its low price it has excellent quality and very wide functionality. It performs best when used at home. Purchasing this machine for small woodworking operations is a very profitable decision.

Summary

Article Name

Sawing machine ranking of the best 2019-2020

Description

Rating of the best wood sawing machines for the home 2021

Author

Sarychev Alexander Viktorovich - forensic construction and technical expert, candidate of technical sciences

Publisher Name

Wikipedia of construction tools

Publisher Logo

DIY guide bar for a circular saw - detailed instructions
Rating of hand-held circular saws 2021
Rating of miter saws 2021 based on customer reviews

« Previous entry

Which sawing machine to choose for your home workshop

If you have come to the need to purchase your own circular saw, then even before going to the store you must determine the criteria that it will meet. There are few of them, but each of them requires separate consideration.

Mobile or stationary sawing machine

The first thing you should decide before purchasing is whether a stationary or mobile saw is suitable for your workshop. Stationary models are installed in fairly spacious rooms with the possibility of approaching the table from any side. They can usually be retrofitted with a milling module. They are better suited than others to work with large workpieces and perform a large number of similar operations. Such equipment is more expensive, but quickly pays for itself with mass production of joinery products.

Stationary sawing machine.

The advantages of a mobile machine are its compactness, the ability to quickly remove it from the work area and return it to its place if necessary, transport it temporarily to the dacha or lend it to a friend. They are often purchased by teams with a traveling nature of work. These models are usually cheaper, less productive, but convenient when handling small parts.

Mobile sawing machine.

Saw table material

If you purchase a ready-made sawing machine, it will be equipped with a standard table that ensures convenient positioning of the workpiece. The material must be durable, absolutely smooth and resistant to mechanical stress. There are several options.

Stamped - steel or aluminum

Work tables made of steel and aluminum are quite simple to manufacture, so models with similar equipment are affordable. High-quality steel easily withstands high dynamic loads, something that products made from aluminum and its alloys cannot boast of.

Steel table of sawing machine.

Conclusion

Judging by all the available information, it can be argued that the best representative of the sawing machines in this review is the Ryobi RTS 1800. The device has sufficient power, a bunch of serious electronic capabilities, good durability and maintainability. If you have the necessary spare parts, the best option would be to purchase this particular machine. The fact is that further experience, which will appear after working with this equipment for a long time, will make it possible to remake it to suit any conditions and needs. It will be indispensable for home use, and Ryobi will not put a big dent in your pocket.

However, this rating is not a guide to purchasing; you should purchase a sawing machine only after consulting with a specialist.