1235 0 0
Icer December 1, 2018Specialization: master in the construction of plasterboard structures, finishing work and laying floor coverings. Installation of door and window units, finishing of facades, installation of electrical, plumbing and heating - I can give detailed advice on all types of work.
Original products are gaining more and more popularity in our country. Today I will talk about an unusual version of tables that are made from wood cuts and have a unique appearance. You will learn about all the advantages of such solutions, as well as how you can build this furniture option yourself.
You can also make a modern table from saw cuts that will fit perfectly into different interiors.
Ideal cuts: where to find?
A novice craftsman thinks that to create such a product it is enough to go out into the yard or into the forest, select a suitable log and cut “circles” for decoration. But it's not that simple.
To prepare cuts yourself, you need to spend a lot of work and time.
But if you make a mistake, you will have to start all over again, since it is impossible to work with cracked discs. You can find a supplier on the Internet. The main advantage of ready-made cuts is that they have already been processed and after purchase you can already begin to realize your dream.
You can buy saw cuts at a sawmill, which will be a budget option, and the choice of designs is huge.
The only drawback is the processing problem. The peculiarity of handmade furniture is that it is unique and exists in a single copy. When selecting a cut, it is necessary to take into account the future design of the tabletop itself.
To make it interesting, you need to select sections of different diameters and the required quantity.
The cut pattern itself also matters. After all, it is this that is the highlight of the future product. Ideally, for greater convenience, draw a layout so as not to improvise, but to know exactly the expected result. Then you will avoid disappointment in the final result.
You can use one type of wood, or combine different options.
Choosing the right material:
- The saw cuts must be dry, and preferably from a type of wood that is resistant to moisture.
- There should be no knots on the workpiece, as they can break off.
- Pay attention to the thickness of the cut. Too thin can crack, and thick will weigh down the craft and make it rough.
It is better that the thickness is from 30 to 50 millimeters. - Avoid low prices for material, since very often cost is an indicator of quality. A product made from low-grade material will not last long. Why waste energy and time?
- Each end must be well glued, so you need to purchase the optimal amount of glue so as not to save it during the work process.
- After working with a grinder, you will need sandpaper, its grit should be 120 or higher.
Glue-resin for wood.
Features of tables made from saw cuts
Since both transverse and longitudinal cuts are used to make tables, the designs can vary significantly in shape, size and purpose. First of all, I will talk about the main aspects that you need to know before you start making the table.
Original interior decoration
Wherever you use this type of table, it will attract attention. This is worth remembering and choosing the location carefully; most often such solutions are used like this:
- Stylish and original coffee table . Most often, the tabletop is a rather thick cross-section, which is fixed on different supports, it all depends on the required height and nature of use.
A very simple but effective solution for living rooms and country houses
- Coffee or dining tables made of large cut wood . This solution is quite large in size, the shape depends on the cut, so the options may be different. It is important to choose an element of the appropriate size to ensure the necessary capacity of the tabletop.
These options look luxurious, but finding a suitable cut can be difficult
- Kitchen and other tables made from small saw cuts filled with epoxy resin . This option is different in that it is made up of small elements, and all voids are filled with epoxy to make the surface smooth. The results are very interesting models that are distinguished by their reliability and durability.
Options from small cuts look unusual
- Large tables made of longitudinal cuts . There are many options for use: from the kitchen and dining room to the living room or even dining area in the gazebo or on the terrace. Most often, the design dimensions are quite large, which allows you to choose the optimal solution for any family.
A table made from a longitudinal cut can have very large dimensions.
Choosing the shape and design of the supporting part
As for the form, there are several main options:
| Illustration | Description |
| Round tabletops . This option is well suited for coffee tables and dining tables. The sizes may vary, but such structures should be placed in the middle of the room, which is not always convenient. Another caveat is that it can be difficult to find a cut of the required size, especially if you need a fairly large table. | |
| Oval designs . A more spacious solution, which has a characteristic shape, which ensures comfortable placement of several people. There are many design options, but it can be difficult to find a suitable blank, for this reason such products are rare. | |
Rectangular options with glass insert in the middle. An interesting solution that uses two longitudinal cuts, one edge of which is made smooth, and the second is placed inside so that there is a gap between the two elements, according to the shape of which the glass is cut.
| |
| Models made from a single longitudinal section . A fairly popular solution, which is distinguished by its large capacity and wide range - you can cut an element to any length, it all depends on what dimensions are needed for your room. |
Tables also differ in the type of base; the main options are as follows:
| Illustration | Description |
| Tables on one leg . This variety is most often used in oval and round models. Decorative elements made from stumps or metal structures are often used to provide strength and good stability. | |
| Options on two supports . Most often these are either flat or corner (as in the photo) elements located on the sides and ensuring the stability of the structure. This is a traditional option that has been used in the manufacture of such furniture for centuries. | |
| Models with three legs . This solution is most often used for round tables, as it ensures their stability. Metal or wooden elements are used as supports. | |
| Classic tables with four legs . A traditional option that uses wooden or metal supports. At the same time, the shape and size may vary, it all depends on the type of tabletop and the purpose of using the furniture. |
Handmade furniture is a source of pride for the owner
You have created a beautiful piece of wood. But the main question you are asking is where to put it? You can place it in the living room or dining room and simply cover it with a tablecloth. But is it really necessary to hide such beauty, because the highlight is in the tabletop.
The unique structure of wood will fill any room with natural beauty.
Interior styles in which the table will look appropriate.
- Rustic. It is also called country music.
This style is characterized by simplicity, so your creation will not get lost among other furniture. - Scandinavian. The style is distinguished by moderation of colors and solidity.
A wooden table is exactly what you need.
The ideal solution would be a rustic or Scandinavian style, but you can show a little imagination and taste. Be the designers of your home. Let the style of your home be individual.
Guests will pay attention to the bright element of the interior, and when they find out that it is handmade, there will be no limit to their delight.
Description of work - different design options
Here I will tell you about the features of making different tables from sawn wood yourself. You need to decide on the optimal variety and carry out the work in accordance with the recommendations from the relevant section.
Ideal saw cuts - where to find them
You should start by searching for blanks, since the appearance of the product depends on them. To find the best solution, keep a few important tips in mind:
- Type of wood . Hardwoods are best suited - oak, walnut, beech, etc., as they are strong and durable. Each option has its own texture, so choose the solution that you like in appearance.
Oak has excellent strength properties and authentic texture
- Humidity of the material . Only completely dried elements are suitable for work. Options that have not gone through the drying process cannot be used, as they may crack or become deformed.
- Element dimensions . The more a table is needed, the more difficult it is to select a workpiece. If you are assembling a version from small cuts, then this aspect is not so important.
What you will need for work - materials and tools
Below I will look at different table options; in each case, the set of fixtures and materials may differ, but the basic elements are always the same. The following materials are needed:
| Illustration | Description |
Blank for table top. It all depends on the table option you choose. It is worth finding a suitable solution in advance that has the dimensions you require and has gone through the drying process. Growers may cut down trees in different ways, but it is important to check that they are not warped.
| |
| Material for the supporting part . You can use both metal and wood. It all depends on the style you choose and the availability of one or another option. It is much easier to work with wood, but metal bases are much stronger and more durable. | |
| Compositions for processing and decorative coating . In order for products to have an attractive appearance and serve for a long time, you should not skimp on means for their protection and decoration. The required set is selected in accordance with the wood used and the nature of the furniture’s use. |
As for the tool, you need the following:
- Screwdriver . Included with it are wood drills and attachments for fasteners.
- Sander. With its help, you can quickly give surfaces ideal smoothness.
- Tool for working with wood . This includes chisels, hacksaws, planes, etc.
- Welding machine . Necessary if the supporting part is welded from metal elements.
- Measuring devices.
- Painting tool for applying protective and decorative coatings.
Loft-style table made of slabs - detailed description of the work
Slabs are the name given to wood cuts in the West, which is why the designs in this style received just that name. I will tell you how to assemble a table with a glass insert; below is a step-by-step process.
| Illustration | Description |
Two parts of the tabletop are prepared, the following work is carried out:
| |
The second stage consists of the following works:
| |
| Glass is ordered ready-made . Cutting such a complex element at home is very problematic; it is better to entrust this work to professionals. | |
| Grooves for glass 10 mm wide are cut into the tabletop . To do this, it is best to use a router, which is placed so that it rests against the end of the glass as if against a pattern and accurately follows its outline. Remember that the glass must be moved the width of the groove so that later it fits exactly into place. | |
| The supporting part is assembled . Since you need to fix two parts of the tabletop in a certain position, the easiest way is to make two frames, as in the photo, which will serve as legs. | |
| All structural elements are adjusted to each other. The supporting parts are placed, the table top with glass is placed on them and leveled. After this, holes are pre-drilled in the bottom of the tabletop. There is no need to fasten anything, it is important to align everything exactly and prepare holes for fasteners. | |
| All parts are treated with protective and decorative compounds. There can be many options, sometimes a protective impregnation is applied first, and then a varnish or other finishing coating. The application technology and all the important nuances of the working process are always described in detail on the packaging with the composition. Carefully study the manufacturer's recommendations to achieve ideal results.
| |
| After complete drying, all elements are assembled . Due to the fact that all holes are drilled in advance, the work is done quickly and the risk of damage to the decorative coating is minimal. Most often, cap screws with a diameter of 6 mm are used; the length is selected according to the materials, since the fasteners should not come out from above; usually they are at least 5 mm shorter than the total thickness of the parts being fastened. | |
| The finished product can be installed indoors . The result is very stylish furniture that fits both classic and modern interiors. To enhance the effect, you can make lighting from the bottom side; the easiest way to do this is to use an LED strip; installing it is simple - the kit always comes with detailed installation instructions. |
